How to Automate Policy and Claims Emails for Insurance Brokers

An insurance brokerage lives on correspondence. Clients report damage, ask for certificates, announce a new address or a new vehicle, question an invoice or want to know whether a risk is covered. Insurers send questions about open claims, requests for documents and confirmations. Almost all of this arrives as email, in a steady flow that does not pause because the team is in a client meeting or on the phone.
Most brokerages handle this with a shared inbox and a lot of experience. That works until the portfolio grows, a colleague is absent or a claims report sits unnoticed between ten routine requests. At that point the question is rarely whether people are working hard enough. It is how much of the daily mail really needs a person's judgement, and how much only needs a person's time.
This article describes a practical way to approach policy and claims emails with AI support. It is written for brokers and brokerage managers who want to keep control of advice and coverage questions while reducing the repetitive part of the inbox. It makes no promises about results: the effect depends on your mix of mail, your clients and the rules you set.
What the inbox of a broker looks like
The mix differs between a small brokerage and a larger one, between private and commercial clients. Several types of email appear almost everywhere:
- Damage and claims reports. A water damage, a car accident, a theft, a liability case. Some are urgent, some are incomplete, and nearly all trigger a chain of follow-up questions.
- Policy change requests. A new address, a new vehicle, a changed sum insured, new bank details for the premium.
- Certificate and document requests. A confirmation of insurance for a landlord, a customer or an authority, a copy of a policy, a premium invoice.
- Questions about existing cover. "Is this damage covered?", "Does my policy include this?", "What is my deductible?"
- Cancellation and contract questions. Notice periods, renewals, a client who wants to end or change a contract.
- Correspondence with insurers. Requests for further information, status updates on open claims, confirmations.
- General enquiries. Contact persons, opening hours, how to report a claim.
The structure of many of these requests is similar from one email to the next. The details differ, but the shape of a good answer is often the same. That repetition is where support can help most.
Why volume becomes a capacity problem
Email in a brokerage does not arrive in batches. It comes in all day, between calls, appointments and advisory work. Each message costs more than the minutes needed to write a reply: the employee has to find the client, open the right contract, check what was agreed earlier, and then write. When the same type of question comes up many times a day, a large part of the working day goes into searching and typing rather than advising.
There is also a quieter risk. When routine mail piles up, urgent mail can disappear in it. A damage report with a deadline, a client who is clearly upset, a message from an authority: these should reach a person quickly, and a crowded inbox makes that harder. The real danger is not that routine questions are answered slowly. It is that something important is read late.
Step 1: Separate urgent from routine
The first and most valuable task is triage. A system that can recognise the type of an email and put urgent items in front of a person addresses the biggest risk directly.
For a brokerage, urgent categories typically include new claims reports, anything with a deadline, messages with a stated loss that is still developing (for example ongoing water damage), complaints and anything that involves a lawyer or an authority. For these, the rule is simple: flag the message, identify the responsible colleague and make sure it reaches them without delay.
InboxFirma can categorise incoming mail and, for a claims report, flag it as urgent and route it to the responsible person. The rules for what counts as urgent and who receives it are defined with you during setup. They are your rules, applied consistently, also when the usual contact person is out of office.
A second benefit of categorising is that the team sees what kind of mail arrives. A queue sorted by type is easier to work through than one sorted only by time.
Step 2: Prepare complete claims reports
Claims emails are often incomplete. The client writes that something happened, but the date, the location, the policy number or the photos are missing. The usual next step is a reply that asks for the missing details, and that reply is very similar every time.
This is a good candidate for assisted handling. Based on the category, the system can prepare a reply that asks for exactly the information your brokerage normally needs for this type of claim. A person reviews the draft, adjusts it where the case is unusual and sends it. For clear cases, you may later decide that a simple acknowledgement of receipt, with the next steps, can go out automatically under your conditions.
Be careful about what the software does and does not do. It can organise the information in the email and prepare a request for missing details. It does not decide whether a loss is covered. That decision belongs to the insurer, and the assessment of the client's situation belongs to your advisor.
Step 3: Standardise routine policy requests
Once urgent mail has a reliable path, look at the routine requests. For each recurring category there is usually an answer or a process you have used many times:
- how a change of address or bank details is submitted and what confirmation follows,
- which documents are needed to add or remove a vehicle,
- how to obtain a certificate of insurance and how long it usually takes,
- where to find a premium invoice,
- how to report a claim and what information helps.
A system trained on your own past replies can prepare drafts in your tone and with your level of detail. Because the drafts come from answers you have actually approved, they tend to need fewer corrections than text from a generic tool.
This is also where several named agents can be useful. A brokerage might set up one agent for private clients and another for commercial clients, since tone, content and the level of detail differ. Each agent can be configured with its own rules and knowledge. Typical examples, such as an agent for claims intake or for contract changes, are illustrative; how many agents you need is agreed during setup.
Step 4: Decide what may be sent without a person
For every category, you decide how much autonomy the AI has. A sensible starting point looks like this:
- Draft for approval: most categories at the beginning, so that a team member checks every reply.
- Automatic sending: only for clear, low-risk cases that have proved reliable, such as confirming that a message was received and explaining the next step.
- Always a person: anything that touches advice, a coverage question, a complaint, a dispute, a legal matter or an authority, and anything where the situation is unusual or emotional.
InboxFirma works with confidence-based rules. When the system is very confident that a message belongs to a category you have released for automatic answers, a reply can go out automatically under your conditions. When it is less sure, the reply is prepared and goes to a person for approval. When the case is unclear or sensitive, it is routed to a person with a note explaining why. The thresholds, and any short delay before automatic sending, are agreed with you during setup and can be adjusted. At the start, you can require approval for every outgoing reply.
Legal and sensitive mail, for example from lawyers or authorities, is routed to a human and is not answered automatically.
Step 5: Keep advice with your advisors
The most important line in a brokerage runs between administration and advice. Asking for a certificate is administration. Asking whether a new business activity is covered is advice. A good setup makes this line explicit.
In practice that means the AI handles requests whose answer follows a known process, and it hands over anything that needs an assessment of the client's situation. Questions of the type "Am I covered if...?" are routed to an advisor, ideally with a short summary of the case and the relevant policy documents at hand. The software prepares and organises; the advice stays with your team and the responsibility stays with you.
Please note that this article does not assess regulatory or professional obligations that apply to your brokerage. How automated handling fits with those obligations is a question for your own review, and it is one to clarify before you go live.
Step 6: Handle attachments and case information
Broker emails come with attachments: photos of damage, scans of letters, police reports, signed forms, policy documents and invoices as PDFs. InboxFirma can read attachments such as PDFs and forms. For documents that are relevant to the answer, the content can be taken into account when a reply is prepared. For other attachments, such as photos, the practical approach is to keep them attached to the case so that the person who handles it has them at hand.
It is worth being realistic here. Reading a document is not the same as assessing a claim. The software can help to extract and present the relevant points, for example the policy number or the date in a letter, but a person makes the call.
Step 7: Think about where the information lives
Many answers depend on data held in your broker management system or in insurer portals: which policies a client has, which claim is open, what its status is. There are two ways to handle this.
First, you can start without integrations. The AI prepares replies from the email and your knowledge base, and your team adds case-specific information when approving. This already removes a good part of the writing effort.
Second, where the lookup is the real bottleneck, the AI can be configured to access the relevant data through a custom integration with your own systems. Such an integration is scoped individually and depends on what your software offers. It does not work by default, and it is better planned as a second phase. Actions such as updating an address in your system can likewise be configured where an integration exists, and can be set up so that a person approves them first.
InboxFirma is an AI application for email support. It is not a broker management system and not a CRM. Your support mailbox is connected as a source, for example via IMAP/SMTP or Microsoft 365, and the reading, drafting, approving and replying happen inside the InboxFirma application.
Step 8: Roll out in stages
A gradual introduction protects both the quality of service and your team's confidence:
- Start with one mailbox and a few categories. Choose frequent, low-risk ones, for example certificate requests and address changes.
- Keep approval on. Every draft is checked by a person. Note how often drafts are accepted without changes.
- Allow automatic sending for proven categories. Use confidence-based rules as described above.
- Add claims handling. Once the routine categories run well, include claims intake, with urgent routing and requests for missing details.
- Extend step by step. Add categories, agents and, where it pays off, integrations.
Step 9: Measure with your own numbers
To judge whether the approach helps, measure what matters to you:
- the time until a client receives a first reply,
- the time until a new claims report reaches the responsible advisor,
- the age of the oldest unanswered email at the end of the day,
- and how much working time goes into routine correspondence.
Compare these figures with a baseline from a normal period before the change. Be careful with promises: the effect depends on your mix of mail, your portfolio and the rules you set. The email automation ROI calculator can help you estimate the effect with your own assumptions, and it states clearly that its default values are assumptions rather than guarantees.
What this does and does not change
What it can change:
- repetitive writing is prepared for you,
- claims reports and deadline mail are flagged and reach the responsible person faster,
- requests for missing details become consistent across the team,
- and your advisors gain time for the conversations and assessments that need a person.
What it does not change:
- responsibility stays with your team,
- advice and coverage decisions remain human decisions,
- and sensitive or legal matters are not answered automatically.
Common pitfalls
- Treating all mail the same. Without triage, a claims report can wait behind routine requests.
- Automating before agreeing on rules. Decide who handles what, and what counts as urgent, before switching anything on.
- Letting advice slip into automation. Keep coverage questions with an advisor from the first day.
- Skipping the approval phase. Trust in automated answers is built through a period of review.
- Expecting integrations to work by default. Connections to your systems are scoped individually.
Next steps
If you would like to see how this could look in your brokerage, our page on AI email support for insurance companies and brokers shows typical scenarios. You can also talk to us about your mail volume and which categories would make a good first step.
The goal is not to take people out of insurance brokerage. It is to make sure their time goes to advice and judgement, while the repetitive part of the inbox is prepared for them.


